on video Automictic Day & Night Sensor Connection for Street Light

 Automatic Day & Night Sensor Connection for Street Light

Today I am going to make a circuit of automatic street light.This circuit will work automatically.In the morning light will be close automatically.This circuit is working with LDR.

This picture shows the pinouts of BC547 Transistor.

As pin-1 is Collector of this transistor,

Pin-2 is Base and Pin-3 is Emmiter of this transistor.

Connect LED to the transistor.

Connect -ve pin of LED to collector pin of the transistor as shown in the picture.

Next we have to solder LDR.

Solder LDR to Base pin and emitter pin of the transistor as shown in the picture.

Next solder 20K resistor to base pin of transistor and in the +ve pin of LED as you can see in the picture.

Now we have to solder battery clipper wire to the circuit.

Solder +ve wire of battery clipper to +ve pin of LED and

-ve wire of battery clipper to emmiter pin the transistor as shown in the picture.

Connect battery to the battery clipper and observe that when light is on the LDR sensor then LED is not glowing and when light is not on the LDR then LED is glowing.

Uses: We can use this circuit as a street light because it will automatically ON and OFF.In the morning when light will come on the LDR then LED will not glow and in the night light will not fall on LDR then LED will glow in the night and vice versa.

 Automatic Day & Night Sensor Connection for Street Light

Today I am going to make a circuit of automatic street light.This circuit will work automatically.In the morning light will be close automatically.This circuit is working with LDR.

This picture shows the pinouts of BC547 Transistor.

As pin-1 is Collector of this transistor,

Pin-2 is Base and Pin-3 is Emmiter of this transistor.

Connect LED to the transistor.

Connect -ve pin of LED to collector pin of the transistor as shown in the picture.

Next we have to solder LDR.

Solder LDR to Base pin and emitter pin of the transistor as shown in the picture.

Next solder 20K resistor to base pin of transistor and in the +ve pin of LED as you can see in the picture.

Now we have to solder battery clipper wire to the circuit.

Solder +ve wire of battery clipper to +ve pin of LED and

-ve wire of battery clipper to emmiter pin the transistor as shown in the picture.

Connect battery to the battery clipper and observe that when light is on the LDR sensor then LED is not glowing and when light is not on the LDR then LED is glowing.

Uses: We can use this circuit as a street light because it will automatically ON and OFF.In the morning when light will come on the LDR then LED will not glow and in the night light will not fall on LDR then LED will glow in the night and vice versa.